Low Cost Microwave Wideband APD Preamp Receivers
(40KHz~18GHz)
Model: MR11
Product description:
MR11 series microwave wideband optical receiver, adopts high Sensitivity APD diode and Low Noise Preamplifier IC, within bandwidth of 40KHz~18GHz, they are featured with excellent linearity, high responsibility and superior flatness of the RF response in both, power and phase. They provide an outstanding linearity fiber optical communication for analogue wideband microwave application. Due to avoidance of using expensive coaxial cable or wave-guide, there will be no limitation in transmission distance, which improves the signal quality and reliability of the microwave communication. They can be widely applied in microwave communication system such as remote wireless, timing and reference signal distribution, telemetry, measurement and delay line etc as well as 10Gb/s high speed communication system.
- MR11 series adopts APD photodiode, with pre-amplifier, low cost, flexible application.
- MR11 Four exterior structures available:
- MX: module type, RS232 is an option, suitable for OEM, Exterior structure and size of the module as well as the PIN description can be specified by customers.
- 2D: desk top, with RS232and LCD display, suitable for laboratory use.
- 1U, 3U: 19" casing, with RS232, SNMP and LCD display, suitable for direct use in networks.
Product features:
- Wide bandwidth 40KHz~18GHz
- Maximum frequency optional: 6GHz, 10GHz, 15GHz, 18GHz
- Superior flatness of RF response
- High responsibility
- High sensitivity, -27.5dBm typical
- Low capacitance high speed InGaAs APD Photo detector
- Low Noise GaAs Pre-amplifier IC
- Full-transparency operation mode, suitable for all kinds of signal code, communication standard and network protocol
- Powerful RS232 communication interface, perfect SNMP function, LCD status display.
- Electromagnetic, RF, thunderbolt assistance
- Four exterior structures available
- Excellent P/P ratio
Main application:
- Antenna Remoting
- Military communications
- Tracking, telemetry and control
- Phased arrays
- Delay lines
- Microwave RF optical links
- High speed lightwave characterization
- 10Gb/s, 12.5Gb/s communication systems
Typical performance:
MR11-20 Cut-off Frequency (S21) |
MR11-20 RF Return loss (S11) |
 |
|
Technical index:
Performance |
Min. |
Typ. |
Max. |
Supplement |
Optical feature |
Operating wavelength range |
(nm) |
1260 |
|
1620 |
|
Responsibility |
R13 |
(A/W) |
0.75 |
0.85 |
|
1310nm |
R15 |
0.8 |
0.9 |
|
1550nm |
R16 |
|
0.8 |
|
1610nm |
Dark current |
(nA) |
|
2 |
50 |
|
Minimum sensitivity |
(dBm) |
|
-27.0 |
-26.0 |
|
Maximum overload |
(dBm) |
-7.0 |
-5.0 |
|
|
Optical return loss |
(dB) |
40 |
|
|
|
Optical connector |
|
SC/APC |
Option FC/APC, LC/APC |
RF feature |
High frequency (cut-off -3dB) |
(GHz) |
6.0 |
|
|
MR11-06 |
8.0 |
|
|
MR11-08 |
10.0 |
|
|
MR11-10 |
13.0 |
|
|
MR11-13 |
15.0 |
|
|
MR11-15 |
18.0 |
|
|
MR11-18 |
-3dB Low frequency |
(KHz) |
|
40 |
|
|
In-band ripple |
(dB) |
|
|
±1.5 |
≤10GHz |
|
|
±2.5 |
12~18GHz |
AC transimpedance |
(Ω) |
1000 |
4000 |
|
Pin=-25dBm |
RF return loss |
(dB) |
8 |
|
|
|
RF output coupled |
|
|
AC |
|
|
RF output connector |
|
SMA-F or K-connector |
|
General feature |
Communication interface |
|
RS232 |
MX, P3 |
SNMP interface |
|
RJ45 |
Network management |
Power supply |
220VAC |
(V) |
90 |
220 |
265 |
1RU, 3RU, 2D |
-48VDC |
-30 |
-48 |
-72 |
1RU, 3RU |
+12VDC |
+11 |
+12 |
+12.5 |
MX |
Power consume |
(W) |
|
|
5 |
MX |
Operating temp. |
(ºC) |
-40 |
|
+65 |
|
Storage temp. |
(ºC) |
-40 |
|
+85 |
|
Relative humidity |
(%) |
5 |
|
95 |
|
Size |
1U |
(") |
19*11.0*1.75 |
19” standard |
3U |
19*14.5*5.25 |
2D |
12.4*13.0*3.5 |
Desk-top |
M1 |
(mm) |
145*75*28 |
With RS232 |
M2 |
70*45*16 |
Without RS232 |
Product series:
Model number |
Highest frequency |
RF output port |
RF Connector |
Structure |
Optical connector |
MR11-06-K |
6.0GHz |
Single port AC coupling output |
SMA-F or K-connector |
1U, 3U, 2D, MX, 3P optional |
SC/APC, optional FC/APC, LC/APC |
MR11-08-K |
8.0GHz |
MR11-10-K |
10.0GHz |
MR11-13-K |
13.0GHz |
MR11-15-K |
15.0GHz |
MR11-18-K |
18.0GHz |
Remark: please refer to model explanation.
Model explanation:
1U, 3U, 2D model explanation:

Modular model explanation:

The parts marked in gray color belongs to other varieties of this product series, the options marked in gray color in this products series can not be specified.
|